Testing Equipments

Product Details:

The Alcohol Breath Tester is Designed to measure concentration result of the Breathed Alcohol in the human body.

 

Specifications:

 Range : 0.00 to 0.20 BAC% , 0.00 to 2.00BAC%0, 0.00 to 1.00mg/L, 0.00 to 200mg/100mL
 Accuracy : ±10%

Features:

· Display 3 Digits LCD Display with Backlight.
· Alarming Level : 0.05BAC%. 0.50BAC%0, 0.25mg/L, 50mg/mL.
· Operating Temperature and Humidity : -10°C to 50°C, ≤95% RH
· Low Battery Indications
· Sensor Fault self Checking.
· Power Supply: 3 X 1.5V AAA Size batteries.
· Display Size :35 X 22 mm
· Unit Size: 103 X 65 X 27 mm.
· Weight : ≤ 64gm Excluding Batteries.
· Accessories : Instruction Manual, 5pcs Extra Mouth Pieces.

Additional Information:

• Production Capacity: 2000

Product Details:

APPLICATION: MEXTECH 23B Brake pressure was transmitted by brake fluid, the pressure transmission will be out of function once brake fluid contains too much water. For safe-driving, we must test water ratio scale in brake fluid regularly. The brake fluid tester help us in current maintenance; making sure we drive in safe conditions.

FEATURES:

• Mute function
• LCD backlight function
• Battery check
• Low voltage warning
• Accessories: User manual, Battery

OPERATION:

1. Install one pcs of 9V(6F22) battery at the back of tester. 
2. After inserting the battery, press POWER button to turn on the tester, all analog bars turns off with buzzer sounding, indicates the product self-test is successfully finished.
3. Press DOT3, DOT4, DOT5.1 button to switch brake fluid type to test. 
4. Get the probe into brake fluid, At this moment, the number of analog bars shows the water ratio in the liquid. When the water ratio is more than 3%, the LCD screen backlight will turn red, and the buzzer will alarm that the brake fluid needs to be replaced. 
5. Press POWER button to turn off the tester.

Additional Information:

• Production Capacity: 100
• Delivery Time: Ex Stock

Product Details:

APPLICATION: In automobile ignition system, the high voltage ignition coil generates a high voltage, and the spark plug diverts it, from high tension ignition coil into the cylinder engine, spark between the spark plug electrodes will ignite the mixture. The Detector could tell the good spark plugs from the bad by the strength of the spark. FEATURES: 1. Dual Hole 2. Adjustable working frequency 1000rpm to 6000rpm/min 3. Protection cap 4. Dual Hole Car Spark Plug Tester Detector have two testing holes, you can test two spark plugs meanwhile and and if you suspect any spark plug works improperly you could compare and test to make accurate judgment. SPECIFICATION: Working Frequency between 1000rpm to 6000rpm. Unit Size: 145 X 110 X 85mm. Weight: 354gms. Power Supply: Power adaptor 12V/1Amp Accessories: Manual, Power Adaptor. Wide range of uses-----professional detector suitable for car owners Usage: Test spark plug performance and ignition strength ① This igniter can be used in spark plug wholesale stores to display product quality ② Used in 4s stores to display the ignition effect and principle of automobile spark plugs. ③ It is used to observe the operation of the spark plug of your own vehicle and compare the ignition effect. ④ Used for testing spark plugs before loading.

Product Details:

The DT-6650 is a rugged multifunction installation tester with 3.5” TFT colour LCD display; provides insulation resistance, earth resistance, loop impedance, voltage, RCD, PFG and PSC testing.

It is designed with an in-built software system and ensures that the safety of electrical installations in domestic, commercial and industrial applications.

DT-6650 can ensure that fixed wiring is safe and correctly installed. It’s fast sampling and dual display, clear symbols and exceptionally wide viewing angle provides easy and safe readings.

LOOP Resistance L- PE (Hi-Amp)

Measuring Current                       : 4.0 A

Range of the Voltage Used                    : 195V AC – 260V AC (50,60Hz)