Oscilloscopes

Product Details:

An Digital Stoarge oscilloscope is a  instrument commonly used to display and analyze the waveform of electronic signals.

Product Details:

We are providing a excellent quality of Digital Oscilloscopes OS5030 which is now the preferred type for most industrial applications. Instead of storage-type cathode ray tubes, DSOs use digital memory, which can store data as long as required without degradation. A digital storage oscilloscope also allows complex processing of the signal by high-speed digital signal processing circuits. It's advantage are brighter and bigger display with color to distinguish multiple traces as well as equivalent time sampling and averaging across consecutive samples or scans lead to higher resolution down to µV.

Feature:

• High luminance, internal graticule CRT

• Japanese electronic encoder,light,handy and reliable

• Fully sealed long live vertical mode switch

• ALT Triggering Function. Two independent signals simultaneous observation

• Build-in 6 Digit Frequency Counter

• 30MHz Dual Channel

• 10 times sweep magnification

• TV Synchronization-Y mode

 

Specification:

Horizontal System:

• Sweep time: 0.2 uSec~0.5 Sec / DIV, 20 steps in 1-2-5 sequence;

• Sweep time accuracy: ±3%

• Vernier sweep time control: ≤1/2.5 of panel-indicated

• Linearity: ±5%,×10 MAG: ±10% (0.2s~1us)

• Position shift caused by ×10MAG: within 2DIV. At CRT screen center

 

X-Y MODE:

• Frequency bandwidth: DC to at least 500KHz;

• X-Y phase difference: ≤3° at DC~50KHz

• Sensitivity: Same as vertical axis. (X-axis : CH1 input signal; Y-axis : CH2 input signal);

• Calibration voltage

• Waveform: Positive-going square wave;

• Frequency: Approx. 1KHz;

• Duty ratio: Within 48:52;

• Output voltage: 2Vp-p±2%;

• Output impedance: Approx. 1KΩ

 

Calibration signal:

• Waveform: Positive-going square wave;

• Frequency: Approx. 1KHz;

• Duty ratio: Within 48:52;

• Output voltage: 2Vp-p±2%;

• Output impedance: Approx.1KΩ

 

CRT:

• Type: 6-inch rectangular type, internal graticule;

• Phosphor: P31;

• Acceleration voltage: Approx. 2KV (20MHz) / Approx. 12kv (40MHz);

• Effective screen size: 8×10 DIV [1DIV=10mm(0.39in)];

• Graticule: Internal;

• Trace rotation: Provided

Vertiacl axis:

• Sensitivity: 5mV~5V / DIV, 10 steps in 1-2-5sequence

• Sensitivity accuracy : ≤3%

• Vernier vertical sensitivity: Continuously variable to 1/2.5 or less of panel-indicated

• Frequency bandwidth: DC~30MHz (x5 MAG : DC~7MHz) / DC~40MHz (x5 MAG : DC~15MHz) DC~50MHz (X5 MAG : DC~15 MHz)

• AC coupling: Low limit frequency 10Hz. (With reference to 100KHz, 8DIV, Frequency response with-3dB.)

• Input impedance: Approx.1 MΩ / Approx. 25pF

• DC balance shift: 5mV~5V / DIV: ±0.5 DIV, 1mV~2mV / DIV ±2.0 DIV

• Linearity: <±0.1 DIV of amplitude change when waveform of 2DIV at graticule center is moved vertically

• Vertical modes: CH1 single channel; CH2 single channel; DUAL: CH1 and CH2 are displayed

Additional Information:

• Item Code: OS-5030
• Port of Dispatch: Mumbai